Water Softener Installation in Metro Detroit
Local installers based in Novi. Your price on one phone call, and no salesperson in your living room.
What's included in a professional install
A water softener installation is more than setting a tank in the basement. Here is what a professional install covers:
- Sizing to your home. We size the unit to your water's hardness and the number of people in the house, so it softens everything without regenerating more than it needs to.
- A bypass valve. So you can take the softener out of the loop for outdoor water or service, without shutting off the house.
- Drain and overflow connections. The regeneration drain runs to a proper drain through an air gap, and the brine tank gets its own overflow line.
- Programming. Hardness, household size and regeneration time are set for your home, not left on factory defaults.
- A cleanup and walkthrough. We clean up, show you the bypass and the salt level, and answer questions before we leave.
For the full step by step, see what happens on install day.
How much does water softener installation cost?
Four things drive the cost of a water softener installation:
- Unit size. A larger household needs more capacity.
- How hard your water is. Harder water means more grains to remove every day.
- Plumbing changes. A loop already in place is simpler than new pipe runs, a relocated drain or a tight space.
- Permits. Some cities require a plumbing permit for the work.
Get an exact quote on one phone call. No in-home sales pitch, and the price is agreed before any work starts. See our water softener cost page for what goes into the number.
Can I install a water softener myself?
Yes, it is possible. Plenty of handy homeowners do it. Before you start, know where DIY installs tend to go wrong:
- Code. You are cutting into the main water line, and local code applies to that work. Some cities require a permit.
- The drain air gap. The softener's drain line has to discharge through an air gap so wastewater can never siphon back into your supply. It is the most commonly missed step.
- Sizing. An undersized unit runs out of soft water; an oversized one wastes salt and can let resin sit unused.
- Warranty. Some manufacturers require a professional installation for the warranty to apply. Read the terms before you buy.
If you are comfortable with all four, DIY can work. If any of them gives you pause, a professional install is the safer choice, and it comes with sizing and programming done for your water.
What size softener do I need for a 2,000 sq ft home?
Square footage does not decide it. A softener is sized by two things: how many people use water in the home, and how hard that water is, measured in grains per gallon.
The usual method multiplies the number of people by their daily water use, then by your hardness. That gives the grains the softener removes each day, and the unit is picked so it regenerates every several days rather than every night. A couple in a 2,000 sq ft home and a family of five in the same house need different units.
To find your hardness, start with our Michigan water hardness guide. On a private well, test first: iron and other minerals change the sizing too, and well water treatment may be the better fit.
Will a plumber install a water softener?
Many general plumbers will, and a good plumber can make the connections well. The difference with a water treatment specialist is everything around the plumbing:
- What we start from. Your water: the published data for your supply, or a test on a well, and what you are seeing at the tap.
- Sizing and programming. Matched to your hardness and household, not the unit on the truck.
- The whole picture. Whether you need a softener alone or softening plus filtration. See softener vs whole-home filtration and salt-based vs salt-free softeners.
If a plumber is already doing work at your house, that is fine. If you want the system chosen and set up for your water, that is what we do.
Water softener installation across Metro Detroit
We are based in Novi and install across Wayne and Oakland counties. Each city below has its own page on its water:
Don't see your city? Call us, we likely still cover it. Most homes get softening together with whole-home filtration.
Water softener installation questions
How much does water softener installation cost?
It depends on the size of the unit, how hard your water is, how much plumbing has to change at the install point, and whether your city wants a permit. Get an exact quote on one phone call, with no in-home sales visit. Our water softener cost page shows what goes into the number.
Can I install a water softener myself?
You can, if you are comfortable cutting into your main water line. The usual problems are a drain line without a proper air gap, a unit sized by guesswork, and a manufacturer warranty that may need a professional install. If any of that gives you pause, a professional install is the safer choice.
What size softener do I need for a 2,000 sq ft home?
Square footage does not decide it. Size comes from how many people live in the home and how hard the water is, measured in grains per gallon. Two homes of 2,000 sq ft can need different units. We size it from your household and your water on the quote call.
Will a plumber install a water softener?
Many plumbers will. The difference with a water treatment specialist is the sizing, the programming and the filtration choices: we start from what is in your water and set the unit up for it, then install it.
Get a free installation quote
Leave your details and we call you with an exact price. Or call (248) 213-7765, 8am to 8pm, seven days a week.

