Novi, Michigan • Locally owned Open 8am to 8pm daily
Home / Water Softener Repair & Maintenance

Water Softener Repair, Maintenance & Salt Service

Softener not working? Local repair and maintenance across Metro Detroit, from a team based in Novi.

01

Common water softener problems

Most softener problems show up as one of these. Here is what each looks like and what usually causes it:

ProblemWhat you noticeLikely cause
Hard water is backSpots, scale and squeaky skin return.Out of salt, a salt bridge, a bypass left open, or settings that no longer match your water.
Salt bridgingThe tank looks full but the water is hard.A crust of salt has formed over empty space, so no brine is made. Common in humid basements.
Brine tank not drainingStanding water stays high in the salt tank.A clogged injector or screen, a kinked drain line, or a stuck brine valve.
Not regeneratingSalt level never drops.A power interruption reset the clock, a motor or timer has failed, or the settings are wrong.
Low water pressureWeak flow through the whole house.Iron or sediment fouling the resin, a clogged pre-filter, or a valve problem.
Error codesThe display shows a code or flashes.Usually a motor, sensor or wiring fault. The code points to which.
02

Does a water softener need routine maintenance?

Yes. A softener is simple, but it is not maintenance-free. Between visits, keep the salt topped up. Once a year, a checkup covers:

  • A hardness test at the tap, to confirm the water is actually soft
  • The valve: settings, clock, seals and a full regeneration cycle
  • The brine tank: salt level, salt bridges, sludge and the brine line
  • The injector and screens, cleaned so the unit draws brine
  • The drain line and its air gap
  • Settings reviewed against your current hardness and household size

On a well, iron and sediment wear a softener faster. See well water treatment.

03

Can you service a water softener yourself?

Some of it, safely. Start here:

  • Check the salt. Keep the tank at least a quarter full, and the salt above the water level.
  • Break a salt bridge. If the tank looks full but the water is hard, push a broom handle down through the salt. If it hits a hard crust with space underneath, break it up gently.
  • Check the bypass. Make sure the bypass valve is in the service position, not bypass.
  • Check the clock. After a power outage, reset the time so it regenerates overnight.
  • Run a manual regeneration. Most valves have a button for it. Then test the water the next day.

Call a professional for a leak, standing water that will not drain, a valve that will not cycle, an error code that comes back after a reset, or hard water that survives all of the above.

04

How much does a service visit cost?

Call for a flat-rate quote. We tell you the price before we come out, so there is no surprise on the day. Thinking about a new system instead? See our water softener cost page.

05

Repair or replace? Older units

Well owners often ask whether a 15 to 25 year old softener is worth rebuilding. Often it is. The tanks on many older units outlast the parts inside them, and a valve can be rebuilt with new seals and a new piston, and the resin replaced, for less than a new system.

Replacement usually makes more sense when:

  • The resin tank or brine tank is cracked or leaking
  • Parts are no longer made for the valve
  • The repair would cost close to a new unit
  • Your water has changed, for example iron in a well, and the old unit was never sized for it

We will tell you honestly which side of that line your unit is on. If it is time for a new one, see water softener installation, and compare salt-based vs salt-free softeners.

06

Water softener repair across Metro Detroit

Based in Novi, we service softeners across Wayne and Oakland counties. Each city below has its own page on its water:

For background on why your area needs softening, read our Michigan water hardness guide. Ask about whole-home filtration while we are there.

07

Softener repair and maintenance questions

Does a water softener need routine maintenance?

Yes. Keep the salt topped up and break up any salt bridge, and have the unit checked once a year: the valve and its settings, the brine tank, the resin's performance and a hardness test at the tap.

Can I service a water softener myself?

Some of it. Checking the salt, breaking a salt bridge and confirming the bypass is open are safe for any homeowner. Call a professional for a leak, a valve that will not cycle, a tank that will not drain, or an error code that comes back.

How much does a water softener service visit cost?

Call for a flat-rate quote. We tell you the price before we come out.

Should I repair or replace an old water softener?

Many units can be rebuilt with new seals, a new piston or fresh resin if the tanks are sound and parts are still made for the valve. When the tank is leaking, parts are no longer available, or the repair costs close to a new unit, replacement is usually the better value.

Book softener service

Tell us what your softener is doing and we call you to schedule. Or call (248) 213-7765, 8am to 8pm, seven days a week.

Proudly based in Novi, serving Metro Detroit

☎ (248) 213-7765 Book Service